PinHub Logo
Motordome
BALLY · 1986

Motordome

In the Files Section is an undated document from the manufacturer, "Bright Lights Field Kit Instructions", although its schematic is dated 10/27/86. It carries this advisory: This kit MUST be installed in your Motordome pinball game. Used on the bottom side of the playfield, it's purpose is to protect the "Bright Light" driver transistors from damage. Also In the Files Section is a Service Bulletin dated Nov-14-1986 that likely accompanied that document.

Image # 4072: Motordome Flyer, Front
Image # 4073: Motordome Flyer, Back
Image # 8470: Motordome Backglass
Image # 8471: Motordome Playfield
Image # 18752: Motordome Backglass
Image # 18753: Motordome Upper Playfield
Image # 18754: Motordome Lower Playfield
Image # 18755: Motordome Cabinet - Left
Image # 18756: Motordome Cabinet - Right
Image # 18917: Motordome Backglass
Image # 30399: Motordome Backglass - Detail
Image # 49656: Motordome Illuminated Backglass
Image # 49657: Motordome Illuminated Playfield
Image # 49658: Motordome Playfield - Detail
Image # 49659: Motordome Illuminated Upper Playfield
Image # 49660: Motordome Illuminated Upper Playfield
Image # 49661: Motordome Backbox - Left
Image # 49662: Motordome Backbox - Right
Image # 49663: Motordome Cabinet - Left
Image # 49664: Motordome Cabinet - Right
Image # 49702: Motordome Inside Backbox 
(The remote battery holder shown here is not original to this game.)
Image # 49703: Motordome Under Upper Playfield
Image # 49704: Motordome Under Middle Playfield
Image # 49705: Motordome Under Lower Playfield
Image # 71171: Motordome Original Backglass Artwork 
(Artist is Tony Ramunni. Watercolor on posterboard.Dimensions 26 inches by 24 inches. Metal frame is 29 by 31 inches.)
Image # 71172: Motordome Original Backglass Artwork - Detail 
(Artist is Tony Ramunni. Watercolor on posterboard.Dimensions 26 inches by 24 inches. Metal frame is 29 by 31 inches.)
Image # 71173: Motordome Original Backglass Artwork - Detail 
(Artist is Tony Ramunni. Watercolor on posterboard.Dimensions 26 inches by 24 inches. Metal frame is 29 by 31 inches.)
Images provided by ipdb.org

Reviews

N/A

0

0

0

0

0

No reviews have been added for this machine yet.

PinTips

View all
general
4
Before plunging be sure to select skill level 3 for 3x playfield
general
2
If flippers are too weak for right ramp, spinner + scoop behind it is the best shot to focus on
general
1
Right ramp to upper hole combo will give a million point shot when million is lit (3 million if you choose skill level 3).
general
1
When the center target is flashing red, hitting it will spot you a letter in MILLION.

Featured Videos

In-Depth Game Guides

No guides have been added for this machine yet.

News Feed