PinHub Logo
Monster Bash
WILLIAMS · 1998

Monster Bash

8.7 1042 reviews

Easter Egg Alert: Before launching the first ball, and with credits on the machine (or free play), press the left flipper 11 times, then press the right flipper once, the left flipper 5 times, the right flipper once, the left flipper 6 times, and finally the right flipper once. The game will say "Totally" then launch the ball. Hitting the scoop with this ball will start Lyman's Lament, playing different music along with the voice of programmer Lyman Sheats commenting while that ball is played. We asked George Gomez in 2016 about the black-and-white test playfield shown in this listing. He replied:It's just a test to check the trapline against the rout. No idea how many would have been made. It was done at Lenc Smith and then sent to us at Willy for approval. It was common practice, sometimes it was run without the white; just black on wood. I showed the Party Animal to Greg Freres and he agrees. That�s a registration check at Lenc Smith. We would not have seen these since they happened at Lenc Smith and were intended to check screens before running quantities. On "trapline" � yes, the term is still in use and not specific to any one company.

Image # 4597: Monster Bash Flyer, Front
Image # 4598: Monster Bash Flyer, Back
Image # 5443: Monster Bash Backglass
Image # 9804: Monster Bash Playfield
Image # 9805: Monster Bash Upper Playfield
Image # 9806: Monster Bash Center Playfield
Image # 9807: Monster Bash Lower Playfield
Image # 9808: Monster Bash Blank Playfield
Image # 9809: Monster Bash Cabinet - Front
Image # 9810: Monster Bash Playfield - Detail
Image # 9811: Monster Bash Upper Right Playfield Detail
Image # 9812: Monster Bash Center Playfield Detail
Image # 9813: Monster Bash Right Playfield Detail
Image # 9814: Monster Bash Creature Detail
Image # 9815: Monster Bash Designers
Image # 9816: Monster Bash Designers
Image # 9817: Monster Bash Back of Playfield
Image # 13055: Monster Bash Backbox - Left
Image # 13056: Monster Bash Cabinet - Left
Image # 21485: Monster Bash Cabinet - Full View
Image # 21486: Monster Bash Cabinet - Left
Image # 21487: Monster Bash Cabinet - Right
Image # 21488: Monster Bash Backbox - Left
Image # 21489: Monster Bash Backbox - Right
Image # 21490: Monster Bash Cabinet - Front
Image # 21491: Monster Bash Cabinet - Rear View
Image # 21492: Monster Bash Cabinet - Inside
Image # 21493: Monster Bash Inside Backbox
Image # 21494: Monster Bash Upper Playfield
Image # 21495: Monster Bash Lower Playfield
Image # 21496: Monster Bash Playfield - Detail
Image # 21497: Monster Bash Playfield - Detail
Image # 21498: Monster Bash Playfield - Detail
Image # 21499: Monster Bash Playfield - Detail
Image # 21500: Monster Bash Playfield - Detail
Image # 21501: Monster Bash Playfield - Detail
Image # 21502: Monster Bash Playfield - Detail
Image # 21503: Monster Bash Playfield - Detail
Image # 21504: Monster Bash Playfield - Detail
Image # 21505: Monster Bash Playfield - Detail
Image # 21506: Monster Bash Playfield - Detail
Image # 21507: Monster Bash Playfield - Detail
Image # 21508: Monster Bash Playfield - Detail
Image # 21509: Monster Bash Playfield - Detail
Image # 29082: Monster Bash Backglass - Detail
Image # 29083: Monster Bash Backglass - Detail
Image # 29084: Monster Bash Backglass - Illuminated
Image # 29085: Monster Bash Instruction Card
Image # 54653: Monster Bash Promotional Poster 
(Provided by Williams in 1998. Measured 24 inches by 36 inches.)
Image # 69686: Monster Bash Black & White Test Playfield
Image # 70318: Monster Bash Coffin Cover Mold 
(This tool was used to thermoform the Monster Bash Mummy Coffin cover (part number 03-9865.2). It is the original production aluminum tooling.)
Image # 70319: Monster Bash Coffin Cover Mold 
(This tool was used to thermoform the Monster Bash Mummy Coffin cover (part number 03-9865.2). It is the original production aluminum tooling.)
Image # 70320: Monster Bash Coffin Cover Mold 
(This tool was used to thermoform the Monster Bash Mummy Coffin cover (part number 03-9865.2). It is the original production aluminum tooling.)
Image # 70321: Monster Bash Coffin Cover Mold - Detail 
(This tool was used to thermoform the Monster Bash Mummy Coffin cover (part number 03-9865.2). It is the original production aluminum tooling.)
Images provided by ipdb.org

Reviews

N/A

0

0

0

0

0

No reviews have been added for this machine yet.

PinTips

View all
general
8
The scoop occasionally hands out smart bombs for monsters. Hit the launch button during modes to get free monster hits/shots.
multiball
7
6 shots to the center spinner will light Mosh Pit Multiball at the scoop. Once started, the center spinner can be used to add two balls.
general
6
Shooting/bombing Drac while he's moving awards double hits.
wizard
6
Start all 6 monsters and then hit scoop to begin Monster Bash mini-wizard mode.

Featured Videos

In-Depth Game Guides

No guides have been added for this machine yet.

News Feed